Hot Tips For The Elmira Asphalt Sealcoating Summer
Elmira asphalt sealcoating is a service you can't afford to forgo! In Chemung County and the surrounding areas, asphalt paving can suffer many forms of distress during the summer season. Intense heat and a battering of UV rays can cause your pavement to deteriorate far faster than you want it to, resulting in a much shorter lifespan and a myriad of repair issues. Driveway sealing in Elmira is your first line of defense, keeping your asphalt in good shape throughout the summer and beyond. In this blog, we'll provide some valuable tips for successful driveway sealing.
When Is the Best Time to Perform Elmira Asphalt Sealcoating?
Typically, sealcoating companies in Elmira prefer to seal paved surfaces in the spring and summer. Spring is usually the prime sealcoating season due to its milder weather. Contractors can't perform driveway sealing in the winter due to freezing temperatures. During that time, sealcoating driveway surfaces leads to improper curing as the sealer freezes in place instead of bonding to the asphalt.
For those reasons, contractors must wait until temperatures warm up in the spring. However, there is also an upper temperature limit that sealcoating companies in Elmira must be wary of. When it's too hot, asphalt sealcoating can flash cure as the moisture content evaporates before the protective emulsion can seep into the pavement and cure.
Generally, the best results from driveway sealing occur when temperatures are between 50 and 90 degrees Fahrenheit. Sealcoating driveway companies also take into account factors such as relative humidity and wind speeds to ensure that asphalt sealcoating cures properly.
What Types of Challenges Do Sealcoating Companies in Elmira Encounter During the Summer?
Summers in Elmira and surrounding communities in the Southern Tier region can reach the upper temperature limits for sealcoating. However, that doesn't mean you can't invest in asphalt sealing services. The biggest concern for sealcoating driveway companies during the summer is flash curing. This occurs when asphalt sealing products dry almost immediately after contact with hot asphalt. The water content evaporates in a flash before the protective ingredients in the sealer have a chance to soak into the asphalt's pores.
Issues like blistering, delamination, and cracking can also occur, and they're all a byproduct of excessively high surface and air temperatures.
What Elmira Asphalt Sealcoating Techniques Can Contractors Use to Maximize Results?
Driveway sealing in Elmira during the summer months can be challenging. However, there are a few workarounds that contractors can employ. In addition to paying close attention to the weather forecast, here are several techniques that skilled asphalt sealing contractors use to protect your pavement despite the summer heat.
- Applying Multiple Coats: When applying asphalt sealing products to hot asphalt, it can quickly evaporate and flash cure. To circumvent that issue, contractors can treat the first coat as a primer. It stabilizes the pavement's temperature, allowing subsequent coats to cure as normal.
- Fogging: Fogging involves misting the entire paved surface with water before driveway sealing. This process cools the asphalt, preparing it for sealcoating.
- Diluting Asphalt Sealer: Sealcoating driveway companies can dilute the first layer of sealer with water, creating a 50/50 mix. The increased water content cools the surface while also allowing the remaining asphalt emulsion to penetrate the pavement. After this diluted layer of sealer cures, asphalt sealing contractors can proceed with their standard formula.
What Should I Do After Sealcoating Driveway Surfaces to Improve Reliability and Protection?
Even after successful driveway sealing in Elmira, your pavement can suffer damage. Not only does the beautiful finish of properly applied and cured sealcoating suffer, but your pavement can also experience distress.
To avoid issues, provide your pavement with all the care and attention it needs. Regularly clean the surface to prevent it from developing a layer of dirt and oil. Wipe up spills immediately and wash the pavement occasionally to keep it clean.
If cracks or damage occur, get professional repair service as soon as possible. Every defect is a potential entry point for water intrusion, and cracks can spread rapidly during the summer months. Prompt repairs and crack filling go a long way.
Finally, get your pavement and sealcoating inspected at least once a year. Consider hiring asphalt sealcoating contractors to assess your pavement after the summer season. You can understand your pavement's condition and perform any necessary repair work before the winter arrives.
NWS House Washing And Asphalt Seal Coating has what it takes to protect your pavement this summer season! We're experts in asphalt maintenance, bringing nearly a decade of proven experience sealcoating driveway surfaces to your project. Our team works diligently to do things right, overcoming any challenges to deliver a stunning finish that will keep your asphalt in great shape. You can turn to us for all your asphalt needs. In addition to asphalt sealing, we do repairs, crack filling, power washing, parking lot striping, and more.
Get your free quote today by calling NWS House Washing And Asphalt Seal Coating at
(570) 423-3614. You can also email nws@usa.com or use our
online form to request a callback.
